Telstar Trampoline Spring 5.5 inch (140mm)

Replacement 5.5 inch (140mm) trampoline spring for Telstar trampolines, sold individually so you can replace just the ones you need. It fits the Telstar Vortex Black and Jump Capsule MK3 models listed below.

Will this fit my Telstar?

Check your model and size in the table. The last column is how many springs the trampoline has in total.

Check first: Telstar Orbit 8ft, 10ft and 7ft x 10ft models use a smaller 5 inch spring, so this listing is not for them.

Which spring do I need?

Take the spring off and measure it from the inside of one hook to the inside of the other. Round the measurement down to the nearest standard size (5, 5.5, 6.5, 7 or 8.5 inches). If you are not sure which model you have, our Identify my trampoline guide will help.

How to fit

Springs should only be fitted by an adult. Wear gloves and use a spring tool.

1. Remove the old spring and hold it up to the light. If you can see light through the coils, the spring has gone dead and should be replaced.
2. Replace springs in opposite pairs, so the tension stays even across the trampoline.
3. Check the other springs while you are there, and replace any that are stretched, rusty or damaged.