Description
Replacement metal rod connector for the safety net on Telstar Orbit and Vortex trampolines. It joins the steel rods in the net enclosure, and fits the 8ft, 10ft, 12ft, 14ft, 10x7ft, 13x9ft and 15x10ft models.
How many do I need?
The table shows how many connectors are used on a complete net and which pack matches it. If you only need to replace one or two, choose the pack of 2.
| Trampoline size | Connectors used | Pack to choose |
|---|---|---|
| 8ft | 6 | Pack of 6 |
| 10ft | 8 | Pack of 8 |
| 12ft | 10 | Pack of 10 |
| 14ft | 10 | Pack of 10 |
| 10x7ft | 6 | Pack of 6 |
| 13x9ft | 8 | Pack of 8 |
| 15x10ft | 10 | Pack of 10 |
How to fit
Attention: the side of the connector with the groove must connect to the side of the steel rod with the notch.
- Look at the steel rod that has a notch in its side. The grooved end of the connector goes onto this rod.
- Put the correct ends into the metal connector together.
- Turn the connector anti-clockwise to tighten and join the metal rods.
| Part | Metal rod connector for the safety net rods |
|---|---|
| Compatible with | Telstar Orbit and Vortex, in 8ft, 10ft, 12ft, 14ft, 10x7ft, 13x9ft and 15x10ft |
| Pack sizes | 2, 6, 8 or 10 |
| Fitting | Grooved end to the notched steel rod, turn anti-clockwise to tighten |
